Arduino Mood Cube

Demo:

Description:

Simple project where I build a Mood Lamp with arduino.

Materials:

• 1x Attiny85
• 4x RGB LED (common anode)
• 12x 220Ω Resistors
• 1x Power Jack Female

Schematic:

Code:

You can get it from my repository here.

	const int redPin = 2;
	const int grnPin = 1;
	const int bluPin = 0;
	void setup()
	{
	pinMode(redPin, OUTPUT);
	pinMode(grnPin, OUTPUT);
	pinMode(bluPin, OUTPUT);
	}
	void loop() {
	digitalWrite(redPin, HIGH);
	}
	void redtoyellow()
	{
	digitalWrite(redPin, HIGH);
	digitalWrite(bluPin, LOW);
	for (byte i = 1; i < 100; i++) {
	byte on = i;
	byte off = 100 - on;
	for ( byte a = 0; a < 100; a++ ) {
	digitalWrite(grnPin, HIGH);
	delayMicroseconds(on);
	digitalWrite(grnPin, LOW);
	delayMicroseconds(off);
	}
	}
	}
	void yellowtogreen()
	{
	digitalWrite(grnPin, HIGH);
	digitalWrite(bluPin, LOW);
	for (byte i = 1; i < 100; i++) {
	byte on = 100 - i;
	byte off = i;
	for ( byte a = 0; a < 100; a++ ) {
	digitalWrite(redPin, HIGH);
	delayMicroseconds(on);
	digitalWrite(redPin, LOW);
	delayMicroseconds(off);
	}
	}
	}
	void greentocyan()
	{
	digitalWrite(grnPin, HIGH);
	digitalWrite(redPin, LOW);
	for (byte i = 1; i < 100; i++) {
	byte on = i;
	byte off = 100 - on;
	for ( byte a = 0; a < 100; a++ ) {
	digitalWrite(bluPin, HIGH);
	delayMicroseconds(on);
	digitalWrite(bluPin, LOW);
	delayMicroseconds(off);
	}
	}
	}
	void cyantoblue()
	{
	digitalWrite(bluPin, HIGH);
	digitalWrite(redPin, LOW);
	for (byte i = 1; i < 100; i++) {
	byte on = 100 - i;
	byte off = i;
	for ( byte a = 0; a < 100; a++ ) {
	digitalWrite(grnPin, HIGH);
	delayMicroseconds(on);
	digitalWrite(grnPin, LOW);
	delayMicroseconds(off);
	}
	}
	}
	void bluetomagenta()
	{
	digitalWrite(bluPin, HIGH);
	digitalWrite(grnPin, LOW);
	for (byte i = 1; i < 100; i++) {
	byte on = i;
	byte off = 100 - on;
	for ( byte a = 0; a < 100; a++ ) {
	digitalWrite(redPin, HIGH);
	delayMicroseconds(on);
	digitalWrite(redPin, LOW);
	delayMicroseconds(off);
	}
	}
	}
	void magentatored()
	{
	digitalWrite(redPin, HIGH);
	digitalWrite(grnPin, LOW);
	for (byte i = 1; i < 100; i++) {
	byte on = 100 - i;
	byte off = i;
	for ( byte a = 0; a < 100; a++ ) {
	digitalWrite(bluPin, HIGH);
	delayMicroseconds(on);
	digitalWrite(bluPin, LOW);
	delayMicroseconds(off);
	}
	}
	}

view raw Arduino Mood Cube hosted with ❤ by GitHub